Banner ED1G - Output Contact Ratings; Dimensions

Output Contact Ratings
Rated Insulation Voltage (UI)
3-position switch: 250V
Momentary pushbutton: 125V
Rated Thermal Current (Ith) 2.5 A
Rated Voltage Ue 30V 125V 250V
Rated Current (le) 3-po-
sition switch Terminals
1-2 and 3-4
AC Resistive load (AC-12) — 1 A 0.5 A
Inductive load (AC-15) — 0.7 A 0.5 A
DC Resistive load (DC-12) 1 A 0.2 A —
Inductive load (DC-13) 0.7 A 0.1 A —
Rated Current (le) Moni-
tor switch Terminal 5-6
AC Resistive load (AC-12) — 2 A 1 A
Inductive load (AC-15) — 1 A 0.5 A
DC Resistive load (DC-12) 2 A 0.4 A 0.2 A
Inductive load (DC-13) 1 A 0.22 A 0.1 A
Rated Current (le) Mo-
mentary push button
switch Terminals 7-8
(model ED1G-
L21SMB-1N); 5-6 and 7-8
(model ED1G-L20MB-1N)
AC Resistive load (AC-12) — 0.5 A —
Inductive load (AC-15) — 0.3 A —
DC Resistive load (DC-12) 1 A 0.2 A —
Inductive load (DC-13)
0.7 A 0.1 A —
Dimensions
All dimensions in mm
Model ED1G-L21SM-1N Models ED1G-L21SMB-1N and ED1G-L20MB-1N
174
86
58
46
54
9
174
86
58
46
54
Momentary
Pushbutton
ED1G Enabling Switch
P/N 151822 Rev. B www.bannerengineering.com - tel: 763-544-3164 11