Instrucon Manual
Banner's WLS27
Mulcolor LED Strip Light has a sturdy aluminum housing and is encased in a shaerproof, UV-stabilized, copolyester
shell, making it ideal for harsh indoor and outdoor applicaons.
• EZ-STATUS combines lighng and indicaon in one device to illuminate an area or machine, and show status change
• Models with 3 or 5 colors available, all with only 3 inputs
• Rugged, water-resistant IEC IP69K rang
• Four available lengths from 285 mm to 1130 mm
• Daisy chain power to mulple lights
Stand-Alone Light or End Light in a Cascade—QD First or Middle of a Cascade—QD
Available as stand-alone models, or as cascade models that can be daisy-chained together for a connuous length of lighng, with a
minimum of wiring.
Stand-alone models have a male quick disconnect (QD) at one end for power connecon and no connecons at the opposite end. A
stand-alone model may be used as the last model in the cascade series.
Cascade models have a male quick disconnect (QD) at one end for power
connecon, and a female QD at the opposite end for
connecng to other lights in the cascade. A double-ended accessory cordset must be used between each pair of lights in a cascade.
Models
WLS27
ConnectorWindow
Lighted
Length (mm)
Colors 1-5 and ControlCascadableFamily
C = Cascadable
X = Non-cascadable
WGRXX3 = White, Green, and Red with override control
WYRXX3 = White, Yellow, and Red with override control
GYRXX3 = Green, Yellow, and Red with override control
WGRYB5 = White, Green, Red, Yellow, and Blue with binary control
WGRXX6 = White, Green, and Red with I/O Block control
WYRXX6 = White, Yellow, and Red with I/O Block control
GYRXX6 = Green, Yellow, and Red with I/O Block control
0285
0570
0850
1130
D = Diffused
Q = Integral 4-pin M12 QD
(mating cordset required)
X
WGRXX3 0285 D
Q
Construction
S
S = Sealed
Voltage
24
24 = 24V dc
Wiring Diagrams
Male
Female
Key
Pin 1 Brown Input 1
Pin 2 White: Input 3
Pin 3 Blue: DC Common
Pin 4 Black: Input 2
EZ-STATUS WLS27 Mulcolor LED Strip Light
Original Document
201896 Rev. A
8 November 2017