Banshee Darkside - Bearing Replacement Instructions; Tools and Materials for Bearing Replacement

!
!
Bearing replacement instructions!
!
Tools needed:!
- Allen key set with two 5mm keys!
- Torque wrench!
- Grease!
- Blue Loctite!
- Bearing puller!
- Bearing press!
- Rubber mallet !
!
For the Darkside, a complete bearing replacement will require a total of:!
4 x 6001 2RS (for upper link pivots)!
2 x 6001 2RS (for chainstay pivots)!
2 x 6002 2RS (for pivot above the BB)!
!
For best performance we only recommend using high quality bearings (SKF, FAG, INA)!
!