PVS-6 series
2K x 2K graphics generators
for real-time visualization
Consumer graphics boards lack performance and support for
use in real-time, life-critical applications like Air Traffic Control,
because these applications require a substantial amount
of pixmap, label and track manipulations. Barco’s PVS-6
series offers state-of-the-art PCI and PCIe graphics generators
designed for applications requiring high-performance drawing
with high-resolution video output. The PVS-6 family provides
two independent video outputs up to 2560 x 2048.
The two independent outputs allow for a single card
to support both the main and auxiliary displays.
Most models can produce RGB video with resolutions up
to 2048x2048 on a combined analog/digital DVI-I
connector (compatible with both the Barco ISIS digital and
analog flat panel and analog Sony DDM CRT display).
The digital output offers the opportunity to upgrade
from analog CRT displays to digital solutions (like the ISIS flat
panel display) without the need for upgrading the graphics
generator.
Main features:
• PCI or PCI express bus
• Dual Video Output
• ISIS/Digital, ISIS/Analog and Sony DDM compatible
• Hardware anti-aliasing
• Hardware accelerated Xinerama
• Hardware accelerated Dual State Xserver
• 128 – 512 MB memory
• Pseudo-color/direct color
To Next Page
Need help?
General