EasyManua.ls Logo

Barcool BAR30 LED - Operating Your Refrigerator; Temperature Control; Instruction for Use; Power Supply

Barcool BAR30 LED
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Setting the Temperature Control:
Your refrigerator has only one control for regulating the temperature.
The temperature control is located on the top of the refrigerator inside.
To control the internal temperature, adjust the control knob according to the ambient temperature
or purpose of use.
The range of the temperature control is from position 0 to 3.
Note
Position your refrigerator so that the plug is accessible.
Keep your refrigerator out of direct sunlight.
Do not place next to a heat generating appliance.
Do not place it directly on the ground. Provide a suitable stand or table
The refrigerator will have better performance at an ambient of 20-25 degrees; We suggest the
refrigerator should be turned off if the ambient temperature is lower than 10 degrees.
After plugging the appliance in, allow the unit to cool down for 2-3 hours before placing items into the
refrigerator.
Ventilation is very important for this kind thermoelectric refrigerator; The inside PCB can be damaged in
the event of poor or inadequate ventilation; It will also reduce the life of the refrigerator.
The refrigerator must be connected to a properly earthed socket in line with relevant valid regulations
before operating;
Check the data label for voltage and frequency that corresponds to your local electricity supply
Thermoelectric Mini-Bar Refrigerator

Related product manuals