Barcool VINO Series - Moving & Handling Your Appliance

Seng the Temperature Control
You can turn the interior light ON or OFF by pushing the buon once.
The light will be turned o automacally if it remains ON for 10 minutes. You have to push the
buon again and the light will turn back on.
You can select temperature display seng from Celsius to Fahrenheit degree by pushing the
buon for 2 seconds.
Your Cooler has been equipped with an “automac” control panel lock, that will acvate 20 seconds
aer the last me a buon has been touched.
Push the buon for 2 seconds to unlock the control panel. You will hear a “BEEP” sound to alert
you that the control is now acve.
You can set the temperature as you desire by pushing the or buon on the control panel.
The temperature that you desire to set will increase 1 °C if you push the buon once, on the
contrary the temperature will decrease 1°C if you push the buon once.
V1 6
Operang Instrucons
How to Safely Disconnect Your Fridge
Take note of the posion of each accessory when packing the appliance.
When re-packing for transportaon, ensure everything is securely packed and accessories are
securely in place.
Avoid liing or pulling the door or handle during transport to prevent damage.
Allow a minimum of 2 hours standing me before reconnecng the appliance to power.
Keep the appliance lted at less than a 45-degree angle from the vercal direcon while moving to
prevent damage. Minimise exposure to strong vibraons during transportaon.
Moving & Handling Your Appliance