barigo PENTA - Page 13

Altimeter
BARIGO
–
Makes
the
Difference
13
Pressing the following buttons has the following functions in the
altimeter mode:
S1
–
to
go to the current time mode
S2
–
press and hold
for the altimeter
setting mode
S3
–
to go to the compass mode
S4
–
to go to the alarm mode
S5
–
to go to the weather forecast
Calibration mode for the altimeter
In Altimeter mode, do the following st
eps
:
1.
Press and hold
S2
for 2 seconds (Dual tone).
A1
shows the
current time.
A2
shows the temperature.
A3
will indicate local
altitude
x
1 km
.
A4
shows the weather forecast.
A5
will move
close to 60 seconds position
.
2.
Press
S1
to adjust
A5
hand to move to
60 seconds position
.