barigo PENTA - System Management and Maintenance; Resetting to Factory Settings

PENTA
Reset
30
The reset mode
The following steps should be executed to return the BARIGO
PENTA to factory settings:
The settings in the reset mode occur according to the following
sequence:
A5

A
4

A1

A2

A3
1.
You can reset the BARIGO PENTA by simultaneously pressing
the
S1, S2, S3, S4
and
S5
buttons.
Here it does not matter which
mode the BARIGO PENTA is currently in.
You will hear a long
signal tone and all indicators will stop.
2.
Press the
S1
button to set the indicator
A
5
clockwise to the position N/360°.
To move
quicker, hold the
S1
button.
By pres
s
ing the
S3
button, you can move the indicator counte
r-
clockwise.
Hold the
S3
button to move quicker
in a counterclockwise dire
c
tion.