barigo PENTA - Page 22

PENTA
Compass
22
Pressing the following buttons has the following functions in the
compass mode:
S1
–
to go to the current time mode
S2
–
to go to the setting mode for the altimeter
S3
–
hold for the compass mode
S4
–
to
go to the alarm mode
S5
–
to go to the weather forecast
The BARIGO PENTA automatically leaves the compass mode after
30 seconds by changing into the watch mode.
Press the
S3
button again to return to the compass mode.
Calibration mode for the compass
The following steps are required for the compass in the calibration
mode: