EasyManua.ls Logo

Barker 31342 User Manual

Barker 31342
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TOTE-ALONG OWNER’S INSTRUCTIONS
Block
(1" x 2")
30 GALLON - P/N 31342
Assembly/Operating Instructions:
Parts List:
Drain water
hook-up:
Connect Tote-Along
to coach with filler
hose assembly.
Vent Tote-Along by
loosening 3” cap.
Holding tank
hook-up:
Connect Tote-Along
to coach gate valve
with straight
bayonet adaptor
and 3” sewer hose.
Towing tank:
Put tow bracket loop over
ball hitch. Do not tow
faster than walking speed.
NOTE: Towing a Tote-Along
in excess of walking speed
can result in considerable
damage to tank or wheels.
Damage of this nature is
NOT covered under
warranty.
Cleaning:
Attach hose to
filler hose
assembly and
flush tank
thoroughly.
Emptying:
Un-hook Tote-Along from coach. Pull to approved
dump station. Vent Tote-Along by loosening 3/4”
cap. Connect hose and adaptor to tank. Insert
hose into riser of dump station. Raise tank to 90
to dump.
°
To extend handle:
Pull handle (12) out until
it’s end hole aligns with
socket (13) hole and
insert quick release
pin (14).
To retract handle:
Put handle (12) fully
into socket (13) and
secure with quick
release pin.
14
12
13
12
14
ITEM PART NO. REQ’D DESCRIPTION
1 26799 1 TANK 30 GALLON
2 20725 2 WHEEL (10”)
3 20676 1 AXLE
4 617-0020 2 BUSHING
5 10225 3 HOSE WASHER
6 615-0001 2 PUSH NUT (5/8”)
7 11576 1 HOSE CAP (3/4”)
8 15655 1 FILLER HOSE ASSEMBLY
9 26060 1 ADAPTOR ASSEMBLY (3”)
10 26048 1 CAP (3”)
11 25524 1 WARNING LABEL
12 31724 1 HANDLE
13 31724 1 SOCKET
14 643-0024 1 QUICK RELEASE PIN
15 602-0014 8 SCREW
16 619-0011 8 EXTERNAL LOCK WASHER
17 10400 1 HOSE CLAMP
18 12316 1 SEWER HOSE (5’)
19 17274 1 WARNING LABEL
20 26097 1 STRAP (3”)
21 26096 1 GASKET
HELPFUL TIPS: THE SEWER HOSE HAS TO FIT SNUGLY TO PREVENT LEAKAGE. THE EASIEST WAY TO GET SEWER HOSE TO FIT ONTO ADAPTOR IS
TO HEAT IT (EX. BLOW DRYER). IT WILL EXPAND SO YOU CAN EASILY THEAD IT ONTO ADAPTOR. SECURE WITH HOSE CLAMP. ANOTHER OPTION
IS TO HAVE PATIENCE AND HOLD A COUPLE OF THE THREADS ON ONE SIDE, WHILE TRYING TO GET THE THREADS ALL THE WAY AROUND THE
ADAPTOR--IT CAN BE DONE (I TRIED IT AND I AM NOT A PATIENT PERSON).
PAGE 1 of 1
PAGE:
DATE:
FORM #:
REVISION LETTER:
ECN#:
APPROVED:
ALL
29 FEB 12
26594
H
14513
Barker Manufacturing Company
1125 Watkins Road / PO Box 460
Battle Creek, MI 49016
Phone 269-965-2371 • Fax 269-965-2389 • www.barkermfg.com
E-Mail: service@ barkermfg.com or sales@barkermfg.com
1
2
2
3
4
5
5
5
6
7
8
9
10
11
12
13
14
16
17
18
19
20
15
Long hub side
toward tank.
21
Question and Answer IconNeed help?

Do you have a question about the Barker 31342 and is the answer not in the manual?

Barker 31342 Specifications

General IconGeneral
BrandBarker
Model31342
CategoryPlumbing Product
LanguageEnglish

Summary

Assembly and Operating Instructions

To Extend Handle

Pull handle (12) out until its end hole aligns with socket (13) hole and insert quick release pin (14).

To Retract Handle

Put handle (12) fully into socket (13) and secure with quick release pin.

Drain Water Hook-Up

Connect Tote-Along to coach with filler hose assembly. Vent Tote-Along by loosening 3" cap.

Holding Tank Hook-Up

Connect Tote-Along to coach gate valve with straight bayonet adaptor and 3" sewer hose.

Towing Tank

Put tow bracket loop over ball hitch. Do not tow faster than walking speed.

Towing Tank Safety Note

Towing in excess of walking speed can result in considerable damage to tank or wheels. Damage is NOT covered under warranty.

Emptying Instructions

Un-hook Tote-Along from coach. Pull to approved dump station. Vent Tote-Along by loosening 3/4" cap. Insert hose into riser of dump station. Raise tank to 90° to dump.

Cleaning Instructions

Attach hose to filler hose assembly and flush tank thoroughly.