barkman Quarry Stone - Page 13

13
05-2021
23
A Place the cap on to the Quarry Stone
as shown in the diagram.
B This is best done with 2 people.
Glue cap using included landscape
adhesive. Adjust cap to ensure it is
centered with a 2" overhang on front
and back, and 4" overhang on the
sides.
USE:
Mantle 4
22
A Place the Quarry Stone as shown in
the diagram.
B Glue pieces to the mantle using the
adhesive provided.
Allow glue to set 2 hours before
installing Firecap.
USE:
(4) 4 x 8 Sierra Grey blocks
24
A Place the Fireplace Hearth on
the Quarry Stone as shown in the
diagram.
B Glue the cap where it contacts
the Quarry Stone below using the
included landscape adhesive.
C Adjust hearth to ensure it is centered
with a 2" overhang on both sides.
USE:
Fireplace Hearth
!
Allow 72 hours for glue and silicone to set before first use.
STOP