barkman Quarry Stone - Materials and Base Preparation; Materials Included; Base Preparation

4
05-2021
This kit measures 78" h x 44" w x 40" d
MATERIALS INCLUDED:
• 12" x 8" Quarry Stone – 115 pieces
• 8" x 8" Quarry Stone – 37 pieces
• 4" x 8" Quarry Stone – 39 pieces
• Fire Brick – 83 Pieces Total
• 9" x 4" Fire Brick – 60 pieces
• 9" x 2.75" Fire Brick – 2 pieces
• 9" x 2.75" Fire Brick – 6 pieces
• 7.75" x 4" Fire Brick – 4 pieces
• 7.5" x 4" Fire Brick – 8 pieces
• 7.5" x 2.75" Fire Brick – 1 piece
• 4" x 2.25" Fire Brick– 2 pieces
• Hearth
• Mantle 1
• Mantle 2 (Front and Back)
• Mantle 3 (Front and Back)
• Mantle 4
• Firecap
• Spark Arrestor
• Tube of Landscape Glue – 2 pieces
• High Temperature Silicone – 2 pieces
• Gloves
• Plastic and Steel Shims
• Instruction Guide
OTHER ITEMS NEEDED:
• Rubber Mallet
• Caulking Gun
• Measuring Tape/Ruler
• Level
Materials
Base Preparation
If installing your Barkman Quarry Stone
Compact Fireplace on an unstructured
base, please ensure to follow these steps:
• Excavate area approx. 9 inches below
grade.
• Excavate approx. 6 inches larger than
your actual kit dimensions to ensure
a stable base.
• Fill with ¾ inch down limestone and
compact firmly.
• Level out ½ inch of sand and install
kit as per the instruction guide.
If you are installing on a solid base
such as an existing patio, base prep is
not necessary. Please proceed to the
first step.
These instructions may not refer to all
base conditions. As this kit is incredibly
heavy, base prep will greatly depend
on existing ground conditions and may
require alternate techniques.
Note: This manual was updated in
May 2021. For manual updates, check
www.barkmanconcrete.com/resources
12 x 8
Quarry Stone
8 x 8
Quarry Stone
4 x 8
Quarry Stone
9 x 2.75
Fire Brick
9 x 2.25
Fire Brick
9 x 4
Fire Brick
7.5 x 2.75
Fire Brick
4 x 2.25
Fire Brick
7.75 x 4
Fire Brick
7.5 x 4
Fire Brick
Fireplace
Hearth
Mantle
Mantle 2
(Front and Back)
Mantle 3
(Front and Back)
Mantle 4 Firecap
Spark
Arrestor
Plastic and
Steel Shims