BarkTec BT-100 User Manual

1. Remove the battery cover and make sure the battery
is placed in the right way with positive to positive and
negative to negative.
(NOTE: If the battery is not fit and is shaking around,
grab a ball point pen and gently bend the pins in
slightly so it holds the battery comfortably. See image
below)
2. Turn on the device with the switch on the front. A test
spray will occur so make sure you aim the spray away
from your face and body
3. Fill the collar with the citronella can provided inside
the box by inverting the can and placing the nozzle on
the valve. Push down and hold for 10-15 seconds to
fill.

BarkTec BT-100 Specifications

General

Brand	BarkTec
Model	BT-100
Category	Pet Care Product
Language	English

Summary

BarkTec Trainer Setup and Operation

Battery Installation and Adjustment

Insert the battery correctly, matching positive to positive and negative to negative. Bend pins slightly if the battery is loose.

Device Activation and Test Spray

Turn on the device. Be aware of the initial test spray and aim it away from your face and body.

Refilling the Citronella Canister

Invert the citronella can and press its nozzle onto the collar's valve for 10-15 seconds to fill.

Collar Attachment and Fitting

Attaching the Collar Strap

Wrap the collar strap around the front of the collar, ensuring the spray and valve face upwards.

Securing the Collar on the Dog

Place the collar on the dog's neck snugly so it stays put and the microphone can detect barking.