Barracuda CloudGen Firewall
F18 Revision B 3 / 6
ROHS compliant Yes
Power & Efficiency
Power Supply Single, external
Power Supply Input Voltage 100 – 240 V, AC
Power Supply Output Voltage 12 V, DC
Power Supply Voltage 50 Hz – 60 Hz
Power Supply Watts 45 W
MTBF [yrs.] > 5
Max. heat dissipation [W] 26.7
Max. heat dissipation [BTU] 90.9
Energy efficiency [average] > 93%
Energy efficiency [average] > 85%
Packaging Content
Appliance Yes
Serial cable Yes
Straight network cable Yes
External power brick and cable Yes
USB flash drive for recovery & installation Yes
Wireless Antenna No
Quick Start Guide Yes
The hardware specifications list was valid at the time this manual was published. The listed
components are subject to change at any time, as Barracuda Networks may change hardware
components due to technological advancements. Therefore, the list may not reflect the current
hardware configuration of the Barracuda appliance it was delivered with.
Wall Mount Kit
This appliances is shipped with a wall mount kit. Print the Barracuda CloudGen Firewall Wall Mount Jig
to use as a template when drilling the required holes. Do not scale the PDF when printing.
LEDs and Acoustic Signals
Your appliance is equipped with a variety of LEDs and acoustic signals. The front panel of
the Barracuda CloudGen Firewall F18 B contains one power LED (blue), one disc LED (green), one
To Next Page
Loading...
