Barreto 3107C Operator's Manual

3104CMS OPERATOR’S MANUAL 9/6/18 Page 1 of 13
MODEL 3107C
CHIPPER
OPERATOR’S MANUAL
3107C INTENDED USE
The BARRETO 3107 Chipper is designed to chip wood limbs and branches and logs up to 7 inches
in diameter.
OPERATOR TRAINING / INSTRUCTIONS
Everyone who operates a 3107C or assists the 3107C operator needs to know the following aspects of
machine operation before operating the 3107C. They are important and must be a part of operator
training.
Rental companies need to understand and be able to explain and demonstrate all of the machine
operations to each rental customer including.
• KNOW AND UNDERSTAND ALL SAFETY POINTS AND CONSIDERATIONS
• Check that all guards/covers and safety decals are in place
o If an engine driven component is exposed or accessible a guard is missing.
• Know how to properly connect the 3107C to a towing vehicle
• Know the towing position of the: swivel jack or stand; chipper hopper and rear flap
• Know the operating position of the: swivel jack or stand, chipper hopper and rear flap
• Understand the 3107C capabilities and intended use
• Know how to start and stop the engine
• Know how to engage and disengage the clutch
• Understand how to prevent clogs
• Know how to safely clear clogs from the chipper and mulcher hoppers
3107C OWNER CONTACT INFORMATION
THIS 3107C BELONGS TO:_________________________________________________
PHONE NUMBER:________________________________

Barreto 3107C Specifications

Engine Specifications

engine power	31hp (22.8 kW) at 3600 RPM
fuel capacity	5 U.S. Gallons (18.9 liters)
engine oil capacity	2.43 U.S. Quarts (2.3 liters)

Weight and Dimensions

GVWR	1900 lbs. (863 kg)
height	89” (2.26m)
length	128” (3.17m)
width	69” (1.75m)