barrier SWING GATE User Manual

MANUAL SWING GATE Installation Procedure
IP36 – MSG5000 © Copyright 2016 www.barriergroup.com.au
Head Assembly
M8 Washer
M8 Nyloc Nut
M8 Washer
(x4)
M8 Nyloc Nut
(x2)
MSGRK
Rail
M12 Nut
(x2)
M12 Washer
(x4)
Exploded View
Wall Mount Assembly
M8 x 60mm Bolt
Brace
M8 Washer
M8 Bolt
M12 x 40 Bolt
(x2)
M8 x 25mm Bolt
Assembled View

barrier SWING GATE Specifications

General

Category	Automatic Barriers
Gate Type	Single or Double Leaf
Power Supply	230V AC
Gate Length	Up to 5 meters per leaf
Control	Remote control, access control system integration
Safety Features	Obstacle Detection
Material	Steel, Aluminum
Protection Class	IP54
Type	Swing Gate
Motor Power	200-400W
Opening Time	10-20 seconds

Summary

Wall Mount Assembly

Exploded View of Wall Mount Assembly

Details the components and their arrangement for the wall mount assembly in an exploded view.

Assembled View of Wall Mount

Presents the final assembled configuration of the wall mount gate mechanism.

Optional Mounting Posts and Installation Guidance

Optional Mounting Post & Receiver Post

Illustrates the optional receiver post and mounting post configurations for the gate.

Important Installation Information and Warnings

Provides crucial safety warnings, important information, and pre-installation checks for correct gate operation.