Bartec Agile S NI - 3 Technical Data; Explosion Protection

Agile S NI - 10.1" Tablet PC
Type B7-A2B.-.…/……..
Technical data
Subject to technical changes.
02/2020
9/20
3. Technical data
3.1 Explosion protection
ATEX Zone 2 and Zone 22
Type B7-A2B3-.…/……..
B7-A2B4-.…/……..
Agile S NI
Labelling
II 3G Ex ic IIC T4 Gc
II 3D Ex ic IIIB T130°C Dc IP64
-20 °C ≤ Ta ≤ +50 °C
Test certificate
EPS 19 ATEX 1 179 X
Standards
See chapter: EU Declaration of Conformity
IECEx Zone 2 and Zone 22
Type B7-A2B3-.…/……..
B7-A2B4-.…/……..
Agile S NI
Labelling
Ex ic IIC T4 Gc
Ex ic IIIB T130°C Dc IP64
-20 °C ≤ Ta ≤ +50 °C
Test certificate
IECEx EPS 19.0079X
Standards
See chapter: EU Declaration of Conformity
Class I Division 2
Type B7-A2B2-.…/……..
B7-A2B4-.…/……..
Agile S NI
Labelling
Class I, Division 2, Groups A, B, C and D, T4A
Test certificate USA and Canada
CSA file 180267
Standards
ANSI/ISA 12.12.01 and
CAN/CSA C22.2 No. 213-M1987
X - labelling (special conditions of use for secure operation within the potentially
explosive atmosphere)
The ambient temperature range is -20 °C ≤ Ta ≤ +50 °C.*
The device must be protected from impact with high impact energy, from intense UV-
irradiation, and strongly charge generating processes.
It is not allowed to use connectors inside the potentially explosive atmosphere.*
It is not allowed to remove, change and/or charge the battery inside
the potentially
explosive atmosphere.*
It is not allowed to operate the camera's flash (LED) as a continuous light inside the
potentially explosive atmosphere.*
The battery must be locked within the potentially explosive atmosphere.*
*See individual chapter on the points.