Bartec BCS 3608ex-NI - BCS 3608 ex Wired Scanners

Hand-held scanners
BCS 3600
ex
series
6 Operation
Subject to technical modifications
16/05/2018
23 / 28
6.2 Inspection to be conducted prior to use
DANGER
Spark formation caused by the connection cable or the battery falling out!
Explosion.

Ensure that the safety lock has been correctly closed prior to use in the potentially explosive atmosphere.
The following risks are present if the safety lock on the underneath of the hand-held scanner has not been closed
correctly:
‒ The battery on a Bluetooth hand-held scanner can fall out.
‒ The connection cable on a wired hand-held scanner can come unplugged.

Check the following points before operating the device:
Final inspection of BCS 3608
ex
-NI / BCS 3608
ex
-IS (wired)
Check points
Scan window free from damage, e.g. scratches
Enclosure free from damage, e.g. crack or break
Temperature in the area in which the hand-held scanner is used corresponds to the specified temperature range
Cables are not damaged
Cables have been certified
Cable on the hand-held scanner is securely engaged and locked
Cables on the universal supply module are securely engaged, locked or screwed tight