EasyManua.ls Logo

Barton Hyper - Fuse Location and Replacement; Battery Specifications and Care

Default Icon
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Tyre pressure: front -2. 0 bar; rear - 2. 3 bar
Caution: proper tire pressure and overall condition is very important to driving safety.
8. Fuse
It's connected to the battery. When the light and entire circuit fails, check the fuse
first. The fuse can only be replaced by a new fuse.
9. Battery
Battery for Barton Hyper: 12V 7Ah
Caution:
when the voltage is less than 11. 5 V, use the foot starter
set the switch indicator to "OFF" before replacing the battery
electrode identification: "+" red, "-" green
change the battery every 4 years
dispose of the used battery at a battery disposal facility

Related product manuals