EasyManuals Logo

Barton Hyper User Manual

Default Icon
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
Air filter replacement
the air filter shall be situated on the left side of the vehicle
loosen the screws and remove the cover
remove the air filter cartridge
clean the cartridge with a cleaning agent or, if this is not possible, replace the
filter with a new one
Put the air filter back in, make sure it is fitted correctly
CAUTION
Do not bend or twist the air filter element, this could damage it. It must also not be
cleaned with water or the wrong oil. A damaged air filter must be changed. Never run
the engine without the air filter.
Cleaning instructions
using a detergent (not flammable!) clean the filter, and after drying, soak the
filter in proper oil
after the filter has been dried and soaked in fresh filter oil, insert the filter
into the housing by fitting it carefully
If the core is damaged, it must be replaced.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Barton Hyper and is the answer not in the manual?

Barton Hyper Specifications

General IconGeneral
BrandBarton
ModelHyper
CategoryMotorcycle
LanguageEnglish

Related product manuals