- 20 -
4.2 Technical specification
Name
Electric hot-dog machine
Code no.:
A120401
Construction: Nickel-chrome steel
Temperature range: 30 °C to 90 ºC
Power: 1000 W / 230 V 50 Hz
Glass cylinder dimensions: Ø 195 mm, height 245 mm
Dimensions: W 260 x D 295 x H 360 mm
Weight: 6.7 kg
We reserve the right to make technical changes!
5. Installation and operation
5.1 Safety instructions
WARNING! Risk of electric shock!
The device must only be connected to a properly installed single socket with
protective contact.
Never remove the power cable by pulling the cable itself; always grab the plug
housing.
• Never allow the power cable to come into contact with heat sources or sharp edges.
The power cable should not hang over the side of the working surface. Ensure that no
one can step on or trip over the cable.
• The power cable must not be folded, bent or tangled, and must always remain fully
unrolled.
• Never place the device or other objects on the power cable.
• Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep
away the cable from operating range and do not dunk it into water.
• Do not use the device in case it does not function properly, has been damaged or
dropped.
• Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.
• Do not move or tilt the device when in operation.
To Next Page
Loading...
