Installation and operation
A190056 13 / 24
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• Do not use the appliance with an external timer or remote control.
5.2 Operation
Risk of burns!
The top warming plate (if it is OFF) and bottom hob become very hot
during operation and remain hot for a certain period of time after
switching off.
Do not touch hot surfaces.
The filter basket and the coffee dregs are hot after the brewing process.
In order to remove the coffee dregs, remove the filter basket carefully.
Risk of burns!
During the brewing a small amount of hot steam is produced.
Maintain caution when removing the glass jug from the hob.
To Next Page
Loading...
