Bartscher A190056 - Page 23

Possible malfunctions
A190056 21 / 24
EN
Problem
Cause
Solution
The appliance
switches off.
The overheating protection
was triggered: too little
water or no water in the
water tank.
Pull the plug out.
Wait for the appliance to
cool down.
Press the RESET button at
the rear side of the
appliance.
Thermostat broken.
Contact the supplier.
The appliance is
switched on, the
red heating-up
indicator light does
not come on but
hot water does not
flow out.
Heating element of the
brewing function damaged.
Contact the supplier.
Damaged thermostat.
Contact the supplier.