Installation and operation
A300068 17 / 22
Counting mode (number of pieces)
This function of the digital scale determines the number of objects in a sample. It
calculates their number taking the weight of the base item as a basis in order to
determine how many pieces there are.
1. Remove all objects from the platform and press shortly to set the appliance
to "0".
2. Press key until the appliance enters "pcs" mode and the display shows
"ADD10".
3. By pressing key it is possible to change the number of pieces (20, 50, 5).
4. Put the number of pieces corresponding to setting (5, 10, 20, 50) on the
platform.
NOTE: The weight of each object should be higher than the minimum
permitted partial value, otherwise the digital display will show "no". Items’
weight must be the same.
5. Press to calculate and save the unitary weight.
6. Remove the objects from the platform.
The digital scale is set to count objects of identical unitary weight.
7. Place the objects to be counted on the platform.
The digital display shows the number of objects.
8. Press to change the number of objects to be counted.
9. Press to abort the counting process.
The digital scale takes the last value to be counted.
To Next Page
Loading...
