Bartscher A300068 - 7 Possible Malfunctions

Possible Malfunctions
A300068 19 / 22
EN
7 Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
Malfunction
Possible Cause
Solution
No indicators appear
on the digital display.
Incorrectly connected plug.
Insert the plug correctly.
Worn out batteries.
Replace the batteries.
Low-voltage indicator
"AC".
Low battery voltage.
Replace the batteries.
Error during the
weight
measurements
readout.
No "0” value was set before
weighing.
Do not put any objects on
the platform, press and
start the weighing process.
Digital scale not calibrated.
Calibrate the digital scale.
Incorrect calibration.
The calibration weight is not
precise.
Use precise calibration
weight.
Error code messages
Messag
e
Possible Cause
Solution
no
During calibration a weight was
placed that does not correspond to
the value of the display.
Place a weight corresponding to
the displayed values on the
platform.
During calibration a number of
objects were placed that does
correspond to the value of the
display.
Place the number of objects
corresponding to the displayed
values on the platform.
AC
Too low battery voltage.
Use new batteries or the mains
adapter.