Cleaning
18 / 24 190187
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
6.2 Cleaning
Always, prior to cleaning, moving or transport of the coffee machine,
empty the water tank.
Risk of burns!
Water in the water tank becomes very hot.
Drain the rest of water from the tank only when the appliance and water
has cooled down enough. To end with, tighten the drain screw.
1. Drain the water remaining in the water
tank with the use of drain screw (b) at the
rear side of the appliance (at the bottom).
2. After each use, clean the thermal pump
jug and filter basket with insert with warm
water and mild cleaning agent.
3. Rinse the cleaned elements in fresh water
and dry.
4. Wipe the housing of the appliance with a soft, moist cloth, and dry at the end.
5. Conduct the brewing process as described in section "Coffee Preparation"; do
not use ground coffee if the appliance has not been used for a prolonged time.
To Next Page
Loading...
