To Next PageTo Next PageWhat to do if the Bartscher Compact Ice II A100.063G Ice Maker's “Add water” and “Ice” lights are on?
If both the “Add water” and “Ice” lights are illuminated on your Bartscher Ice Maker, it indicates that the ice scoop might be stuck. First, check if any ice is blocking the ice scoop. If there is no ice blockage, then you should contact a qualified technician for assistance.
Why are my Bartscher Ice Maker's ice cubes sticking together?
If the ice cubes from your Bartscher Ice Maker are sticking together, it could be due to two reasons. First, the ice cube making process might be taking too long. To resolve this, turn off the device, wait for the ice cubes to melt slightly, and then turn it back on. You can also select the 'S' setting to produce smaller ice cubes. The second reason might be that the water temperature in the container is too low. In this case, replace the water in the container with water that is between 7° and 32° C.
What to do if Bartscher Ice Maker is making ice slowly or not at all?
If your Bartscher Ice Maker seems to be running normally but isn't producing ice cubes, it could be due to a few reasons. The room temperature or the water temperature in the container might be too high. Ensure the room temperature is below 32° C and use colder water in the container. Alternatively, the cooling agent might have run out, or the cooling tubes could be blocked. In either of these cases, you should have a qualified technician check the unit.
What happens if the power goes out during ice making in my Bartscher Compact Ice II A100.063G Ice Maker?
If the power supply to your Bartscher Ice Maker is interrupted during the ice-making process, the process will automatically stop. To resolve this, switch off the device, pull out the plug (not the cable), wait a few minutes, carefully remove the ice cubes, and then switch the device back on.
How to fix the “Ice” indicator light on my Bartscher Compact Ice II A100.063G Ice Maker?
If the “Ice” indicator light is illuminated on your Bartscher Ice Maker, it means there is too much ice in the ice cube basket. Simply remove some ice from the basket to resolve the issue.
How to fix “Add water” light on Bartscher Compact Ice II A100.063G Ice Maker?
If the “Add water” indicator light is on, it means the Bartscher Ice Maker has no water. To fix this, switch off the device, fill it with water, and then switch it back on.
Provides an overview of the contents and purpose of the instruction manual.
Explains the meaning of various symbols used throughout the manual for safety and guidance.
Details the manufacturer's liability and warranty terms and conditions.
Outlines the copyright restrictions for the manual's content and illustrations.
Confirms the device's compliance with current EU standards and directives.
Covers general safety aspects, user responsibility, and device handling precautions.
Provides specific safety rules and guidelines for the correct and safe operation of the device.
Defines the correct purpose and application of the ice cube maker.
Instructions for inspecting the delivery for completeness and transport damage.
Guidance on handling, reusing, and disposing of the product's packaging materials.
Recommendations for storing the device safely and appropriately.
Details the technical specifications, including power, capacity, and dimensions.
Identifies and labels the main components and parts of the ice maker.
Crucial safety warnings related to the installation and operation phases.
Step-by-step instructions for properly installing and connecting the device.
Guidance on the procedures for operating the ice cube maker.
Essential safety precautions to be observed before any cleaning or maintenance work.
Procedures for regular cleaning and removing limescale deposits.
Safety guidelines for performing maintenance, emphasizing professional service.
Instructions for safely and legally disposing of the device at the end of its service life.
General| Model | Compact Ice II A100.063G |
|---|---|
| Ice Production | 12 kg/24h |
| Ice Cube Shape | Bullet |
| Ice Cube Size | Small, Medium, Large |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Dimensions (W x D x H) | 242 x 358 x 328 mm |
| Refrigerant | R600a |
| Water Connection | Manual fill |
| Type | Ice Maker |
| Water Tank Capacity | 2.2 litres |
| Material | Plastic |
| Drainage | Manual |
