EasyManua.ls Logo

Bartscher E500 LPR - Page 11

Bartscher E500 LPR
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 31 -
The supply cable must be disconnected from the socket
only by pulling the plug.
Never carry or lift the device by the supply cable.
In any case do not open the device housing. In case of
electrical or mechanical modifications the electric shock
hazard will occur.
Do not use any acid agents and make sure no water ingresses
the device.
Never operate the device with moist hands or standing on wet
floor.
Remove the plug from its socket:
- when the device is not used,
- in case of anomalies during operation,
- before cleaning.
CAUTION!
In order to avoid any damages to the device follow the
instructions below:
To clean the device, NEVER use cleaning agents, such as acids,
solvents or chlorine-based washing fluids, to avoid damaging
components of the washing machine.
The device is designed for operation at temperatures from 5 °C
to 40 °C, which needs to be considered when selecting a place of
installation.
Use only dishwasher baskets, cleaning agents and rinse aids
recommended by the manufacturer.