Installation and operation
190052 21 / 44
3. If during preparation the coffee flows very
slowly or does not flow out completely,
set the grinding coarseness to 4 or 5.
4. If the ground coffee is dark, we recom-
mend higher coarseness settings: 4 or 5.
The changes to the grinding coarseness will
only be noticeable after 2 or more fresh cups
of coffee are brewed.
Preparing beverages
The appliance may still contain coffee ground during factory testing, hence the first
2–3 cups after start-up should not be drunk.
1. Select the beverage by pressing the button
with the required symbol.
2. Us the '∧' and '∨' setting buttons to select
subsequent options, e.g. amount per cup,
etc.
This setting is not stored.
3. Press the 'Back' button, to interrupt the
beverage preparation.
To Next Page
Loading...
