- 26 -
7. Possible Malfunctions
If malfunctions occur, attempt to fix them yourself following the instructions in the table
below before contacting a sales agent.
Problem Cause Solution
No cooling
• Plug not in socket.
• Circuit failure.
• Lack of electricity
• Insert plug properly.
• Check power source.
• Check power source.
Insufficient
cooling
• Direct sunlight or heat
source nearby.
• Improper air circulation
around the device.
• Doors improperly closed
or open for too long.
• Damaged or deformed
seals.
• Too little space between
objects in refrigerator or
too many items stored.
• Improperly set temperature.
• Take device away from
heat source.
• Check distance from
walls or other objects.
• Close doors; time of
opening must be as short
as possible.
• Contact a sales agent
• Remember to keep proper
distance between bottles,
remove unneeded objects
• Set temperature properly.
Device functions
loudly.
• Freezer is on an uneven
surface.
• Freezer is touching wall or
other objects.
• Place freezer on an even
surface.
• Leave proper distance
between freezer and other
objects.
Compressor fails
to come on
automatically.
• Drinks freezer is overfull.
• Doors opened for too long.
• Remove unnecessary
objects.
• Keep doors open for as
short a time as possible.