Basalte Auro - User Manual

Auro KNX
Installation Manual
004-010-01 v1.0 © 2010 basalte
Before operating the unit, please read this manual thoroughly and retain it for
future reference.
Model No. 180-02
You are cautioned that any changes or modifications not expressly approved in
this manual could void your authority to operate this equipment.
Caution: The device could become damaged.
Never connect the device to 230V!
Caution: The device may only be installed and connected by professional
electricians. Observe the regulations valid in the country of use, as well as valid
KNX guidelines.
basalte is a registered trademark of Basalte bvba.
Auro is a registered design of Basalte bvba.
KNX is a registered trademark of the KNX organisation.
Identitifying the parts
A Programming button
B Programming led
C KNX connector
Rear
A
B
C

Summary

General Precautions and Identification

Operational Warnings

Read manual, retain for reference, and avoid unauthorized modifications to prevent voiding authority.

Device Safety

Caution against connecting to 230V and risk of damage; requires professional installation.

Part Identification

Identifies the programming button, LED, and KNX connector via diagram and labels.

Basalte Auro Specifications

General

Category	Security Sensors
Type	Motion Sensor
Technology	Passive Infrared (PIR)
Power Supply	24V DC
Operating Temperature	0°C to 40°C
Certifications	CE, RoHS
Detection Range	12 meters
Humidity Range	0% to 95% (non-condensing)
Mounting	Wall mount
Compatibility	KNX