Basalte Sentido KNX User Manual

Sentido KNX
Installation Manual
004-006-03 v1.7 © 2010 basalte
Before operating the unit, please read this manual thoroughly and
retain it for future reference.
Model No. 200-02
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
Caution: The device could become damaged.
Never connect the device to 230V!
Caution: The device may only be installed and connected by
professional electricians. Observe the regulations valid in the country
of use, as well as valid KNX guidelines.
The Sentido switch for KNX is a four way touch sensor.
The Sentido switch has to be used in combination with the Sentido front covers, either four-way or two-way.
By touching each of the four touch sensitive area’s you can use KNX to execute a range of functions incuding switching,
dimming, operating blinds, activating scenes, etc.
Touching a touch sensitive area will give a visual feedback by means of lighting up the central RGB led.
The central RGB led can also be controlled by KNX to provide a visual feedback of statuses. The led can also be used to
illuminate the switch in the dark.
The Sentido switch uses the patented Multitouch technology. Touching more than one touch sensitive area at the same time
activates an additional comfort function wich also can be used by KNX.
B
A
C
H
F D
Identitifying the parts
A RGB-led
B Programming button
C Programming led
D Touchsensor (with according no. to be programmed in ETS)
E Temperature sensor
F Opening to screw the device into the backbox
G Guide for the Sentido front cover
H KNX connector
G
-
+
Front
Rear
basalte is a registered trademark of Basalte bvba.
Multitouch is a patented technology by Basalte bvba.
Sentido is a registered design of Basalte bvba.
KNX is a registered trademark of the KNX organisation.
E
1
2
4
3

Basalte Sentido KNX Specifications

General

Brand	Basalte
Model	Sentido KNX
Category	Switch
Language	English

Summary

Sentido KNX Introduction and Safety

Sentido KNX Functionality

Details the Sentido switch as a four-way touch sensor for KNX, its use with front covers, and multitouch capabilities.

Identifying Sentido KNX Parts

Lists and visually identifies all physical components of the Sentido KNX device, including sensors, LEDs, and connectors.

Essential Safety and Installation Warnings

Covers critical warnings for safe operation, including voltage limits, modifications, and professional installation requirements.

Installation and Operation Guide

Mounting the Sentido Switch

Instructions on using European backboxes, screw distances, depth, and precautions for mounting the device and front cover.

Sentido KNX Initial Operation

Steps for connecting to the KNX bus, loading addresses, and configuring the device using ETS software.

Calibrating the Sentido Switch

Explains the automatic calibration process at startup, including visual feedback via the RGB LED.

Operating the Sentido Switch

Details how to interact with touch surfaces, RGB LED feedback, multitouch functions, and KNX control of the LED.

Sentido KNX Technical Specifications

Sentido KNX Technical Data

Provides key technical specifications including power, sensors, temperature ranges, humidity, and protection class.