Need help?Do you have a question about the Bascom_turner GAS-ROVER VGI-201 and is the answer not in the manual?
General safety precautions for instrument operation and handling.
Details various Gas-Rover detector models and their measurement capabilities.
Covers powering on, pump checks, filter use, and zeroing procedures for the instrument.
Describes the startup sequence, backlight function, and how to turn the instrument off.
Outlines automatic sensor and pump checks, and how to verify connection tightness.
Explains how different gases can affect methane and CO sensor readings.
Provides instructions for replacing batteries safely in a non-hazardous atmosphere.
Lists and describes various probes available for the Gas-Rover detectors.
Details the use and replacement of dust and water-block filters for instrument protection.
Covers setting time, date, and alarm limits for the detector's operation.
Explains parameters like calibration due time, pump current, and new sensor installation.
Details the procedures for calibrating the instrument using specific calibration gases.
Describes how to download readings, calibrations, and user data from the detector to a PC.
Explains how to generate and view various reports like readings, exposure, and calibration history.
Covers uploading location and username data via the DATA-LINK software.
Provides step-by-step instructions for replacing sensors and the pump motor.
General| Brand | Bascom_turner |
|---|---|
| Model | GAS-ROVER VGI-201 |
| Category | Gas Detectors |
| Language | English |
To Next Page