Need help?Do you have a question about the Bascom_turner OM-1108 and is the answer not in the manual?
General| Brand | Bascom_turner |
|---|---|
| Model | OM-1108 |
| Category | Smoke Alarm |
| Language | English |
Overview of different Gas-Ranger detector models and their capabilities.
General operating practices, pump tests, zero checks, and calibration needs.
Procedures for checking battery, pump, connections, and sensor status.
Details on how other substances and RFI can affect detector readings.
Step-by-step instructions for replacing the instrument's batteries.
Common problems, probable causes, and recommended actions for the instrument.
Description of standard, flue gas, and bar hole probes available for the detector.
Guide to cleaning and replacing filters and other routine upkeep procedures.
Instructions for performing automatic calibration using Bascom-Turner's A-CAL firmware.
How to review, turn off, or adjust alarm limits and select other options.
Procedures for manual calibration, replacing sensors, and adjusting pump settings.
To Next Page