BASENGREEN BR-BOX-LV 5KWH

Need help?

Do you have a question about the BASENGREEN BR-BOX-LV 5KWH and is the answer not in the manual?

Summary

Preface

Product Information

Label Explanation

Details product label information including model, specs, and safety symbols for identification.

Product Description

Overview of the LiFePO4 battery, its composition, and application in home energy storage systems.

Technical Specifications and Features

Product Advantages

Highlights key benefits like BMS, expandability, wide temperature range, and modular design for users.

Product Appearance and Dimensions

Visual depiction and dimensions of the battery pack, showcasing its physical design and size.

Detailed Specifications Table

Comprehensive technical data including voltage, capacity, temperature, and dimensions for all models.

Interface Ports and Indicators

Explains the function of each interface port and status indicator on the battery unit.

Battery Management System (BMS) Functions

Details BMS features: overcharge, overdischarge, overcurrent, and temperature protection mechanisms.

Installation and Configuration

Package Contents and Initial Check

Guides on verifying package contents and performing initial checks for damage before installation.

Installation Wiring Guide

Step-by-step instructions for connecting power and communication cables to the battery and inverter.

Installation Connection Diagrams

Visual representations of correct wiring for different battery pack configurations.

Connection and Communication Setup

Inverter Connection Safety Precautions

Essential safety steps and checks before connecting the battery to the inverter system.

Communication Cable Pinout Definitions

Defines pin assignments for RS485/CAN and parallel communication cables for accurate connectivity.

DIP Switch Configuration for Parallel Operation

Explains DIP switch settings for master/slave addressing in parallel battery setups.

Operation and System Monitoring

Pre-Operation Checks and Power On Sequence

Outlines pre-power on checks and the procedure for safely activating the battery system.

LED Indicators and Fault Diagnosis

Interprets LED status during operation and identifies fault conditions for troubleshooting.

Upper System Software Integration

Guides on connecting to and logging into the upper system software for battery monitoring.

Communication Protocol Selection

Details how to choose and set communication protocols for seamless system integration.

Inverter Compatibility and Protocol List

Lists compatible inverters and their specific communication protocols and settings.

Storage and Safety Guidelines

Battery Storage Best Practices

Recommendations for storing batteries safely, including charge levels, environment, and temperature.

Critical Safety Warnings and Precautions

Crucial safety warnings covering handling, usage hazards, and prevention of damage or injury.