Baseus F01B Tri-Mode Wireless Mouse
Before using the product, thoroughly read this manual. Keep the manual for future reference.
Left button
Right button
Scroll wheel
DPI button
Press to change the mouse sensitivity (DPI)
Note: 1600DPI mouse sensitivity by default.
Press to switch between connection modes.
ON/OFF button
Indicator
BT5.0 mode
Battery Installation
Open the cap and install the batteries inside (make sure the polarities are connected properly), and close the cap.
2.4G Mode Connection
1. Turn on the mouse, and take out the USB receiver on the back.
2. Connect the receiver to the device. Switch to the connection mode to 2.4G.Click and move the mouse until the
cursor shows up on the screen.
Wireless Mode Connection
1. Turn on the mouse, switch the connection mode to wireless mode, and enter the pairing state.
2. Turn on the wireless of the device, and search to pair. Select model: Baseus F01B.
Specifications
Name: Baseus Creator Tri-Mode Wireless Mouse
Model No.: F01B
Material: ABS
Transfer Distance: 20m, 10m
Connection Type: 2.4G mode + dual-wireless mode
Wireless Version: BT5.0,
Sensitivity: 800/1200/1600DPI
Response Frequency: 250Hz
Compatible Systems: Windows, HarmonyOS, Apple OS, Linux, Vista, etc.g on
Warnings
Improper use of the product can easily cause damage to the product or may endanger personal and property
safety.
To Next Page
General