Basic American ZENITH Series - Page 17

Zenith aps seRies
BED OPERATIONS - CHAIR POSITION
Basic American Medical Products, a division of GF Health Products, Inc. www.grahamfield.com 999-0831-190A Service Manual
17
1. Make sure the Chair position on the staff
control panel is not locked out (orange
lock icon). To unlock, press the Key icon #1
and Chair icon #2) (or All Locked button
#3) at the same time.
2. To move the bed to the Chair position
(foot & knee decks angled up, head deck
angled up, and head of bed tilted upward),
press on the chair icon button (#2).
To release the chair feature and return
the bed back into a horizontal position,
press the CPR icon (#4). The Chair feature
can also be operated using the Pendant.
(See page 15.)
1
2
4
3
BED OPERATIONS - CPR/HEART POSITION
1. Make sure the bed positions on the staff
control panel are not locked out (orange
lock icon). To unlock, press the Key icon (#1)
and the All Locked button (#3) at the same
time.
2. To smoothly move the bed into a prone,
horizontal position for CPR access, press
and hold the CPR/Heart icon button (#2).
1
2
3
HEAD
END
FOOT
END
CPR POSITION
(The CPR button places the bed in a horizontal position)
This illustration shows bed all the way down as a reference only -
the CPR button will not lower the bed.)