6
S
E
CTION IV
S
TOPPING PRECEDURE
ü Slowly destroke speed control lever to the “park” position
ü Engage parking brake
ü Push engine throttle control to “idle” position
ü Turn ignition key to “off” position
ü Remove key
ü Place block in front and rear of wheels to prevent movement
ü Park on level ground whenever possible. When not possible, position the
machine at right angles to the slope. Make sure the machine is on a firm
footing and that there is no danger of sliding.
CAUTION: Never jump off of the machine.
Dismount slowly and carefully.