Need help?Do you have a question about the Basler BE1-50/51B-105 and is the answer not in the manual?
Details the electrical and physical specifications of the relay.
Details current sensing input specs for 1 and 5 ampere units.
Covers TIME PICKUP setting, timing range, and accuracy.
Describes the integrating reset function and its characteristics.
Details INST PICKUP settings, range, increment, accuracy, and dropout.
Illustrates device burden characteristics with Figure 1-4.
Details ratings for resistive and inductive output contacts.
Lists locator, control/indicator, and their functions.
Explains functions of SW3-1, SW3-2, SW3-3, and SW3-4.
Explains how to configure auxiliary output contacts using jumpers.
Explains the role of the microprocessor and its associated components.
Provides a block diagram of the relay's functional components.
Details on wiring, grounding, and connecting the relay.
Details dielectric (high potential) test requirements.
Procedures to verify the relay's operation and test specific functions.
Lists required test equipment and illustrates test setups.
Procedure to test the integrating reset function for 200 series relays.
To Next Page
General
