How to fix distortion on Bass Habit Subwoofer?
If you're experiencing distortion with your Bass Habit Subwoofer, first check the GAIN setting. Additionally, try turning off the bass boost feature.
What to do if Bass Habit Subwoofer has no audio?
If your Bass Habit Subwoofer has no audio, check the source unit and signal cables. If connected with high-level inputs, inspect the connections and speaker cables.
How to troubleshoot a Bass Habit Subwoofer with no power?
If your Bass Habit Subwoofer has no power, measure the power cable and REM connection. Also, check the fuses and the control GND connection.
Warnings about moisture, wiring, driving distractions, and safe listening levels.
Guidelines for wiring, chassis connections, vehicle lines, and avoiding moving parts.
Lists items not covered by Bass Habit warranty, like improper installation or misuse.
Contact country's distribution agent for international technical support.
Lists all components included in the P8A active subwoofer enclosure package.
Notes that installation may require mechanical experience and recommends contacting a dealer if unsure.
Guidance on selecting an optimal location for the subwoofer enclosure for best sound quality and fit.
Safety advice for installation, including eye protection, disconnecting battery, and avoiding force.
Instructions on choosing between High Level or Low Level input connections for the subwoofer.
Illustrates wiring for connecting the subwoofer using high-level (speaker wire) inputs.
Illustrates wiring for connecting the subwoofer using low-level (RCA) inputs.
Connects to sound system's speaker wires; AUTO ON feature.
For remote volume control and connecting to source unit RCA output.
Adjusts input sensitivity and sets the Low Pass Filter frequency.
Enhances bass frequencies and indicates protection mode (red).
Power connector for system power/turn-on and 20A fuse for protection.
Using the included connector for existing speaker wires and its AUTO ON feature.
How to set input sensitivity correctly, noting GAIN is not a volume control.
Enhances bass frequencies; use with care and adjust after setting GAIN.
Details for connecting +12V, REM, and GND wires, including fuse placement.
Lists technical specifications including size, power, impedance, frequency response, and dimensions.
Checks for power cable, REM connection, fuses, and GND connection.
Verifies control source, signal cables, and high-level connections/speaker cables.
Checks power cables, battery condition, impedance, and speaker cables.
Troubleshoots by checking GAIN setting and turning off bass boost.
Instructions for proper disposal of the product and packaging as electronic waste.
Information on RoHS compliance and the meaning of the CE mark for market access.
Contact information for Winn Scandinavia AB and website.
General| Brand | Bass Habit |
|---|---|
| Model | Play P8A |
| Category | Subwoofer |
| Language | English |
To Next Page