3. Place battery pack on battery tray and fasten Velcro straps around battery tightly. Insert battery plug into
caddy outlet. Note: BEFORE CONNECTING make sure that caddy power is OFF, Rheostat Speed
Control on handle is in OFF position and the remote control is stored securely!!!
4. Insert anti tip wheel into holding bar on motor housing and secure with pin.
5. Install Scorecard Holder and other accessories, such as beverage or umbrella holder onto the frame or
handle in the foreseen places or receptors. (note: accessory design might vary during the model year)
Page 5 of 16
To Next Page
Loading...
