Batca Fusion 2 - Page 25

www.batcafitness.com 25 Fusion 2 Owner’s Manual
Step 14: Continued
All Flat Washers and Nylocks are 3/8” unless otherwise noted.
3/8” x 2 3/4”
(Qty=3)
3/8” x 4 3/4”
(Qty=3)
1/2” Curved
Pulley Spacer
(Qty=2)
3/8” Curved
Washer
3/8” x 2 1/4”
3/8” x 2 1/4”
Step 15: Repeat for alternate side of Fusion. Use same Bill of Materials
from Step 14 for Step 15. Use CAB-13021, Fusion Lat Pull to
Functional Arm.
3/8” x 2 1/4”
(Qty=3)
3/8” x 2 1/4”
3/8” x 2”
(Qty=2)
Start
Here
D
C
B
A
A B
D
C
3/8” x 2”
3/8” x 2”
3 1/2” Pulley Cover