EasyManua.ls Logo

Batca LINK LD-4 - Page 21

Batca LINK LD-4
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.batcafitness.com 21 LD-4 Owners Manual
Daily Weekly Monthly Quarterly Years
Commercial Home Commercial Home Commercial Home Commercial Home Commercial Home
Clean
Upholstery X X
Hand Grips X X
Roller Pads X X
Guide Rods X X
Chrome Slides X X
Frame X X
Inspect
Overall X X
Safety Decals X X
Cables X X
Cable Tension X X
Pulleys X X
Hardware X X
Stops X X
Upholstery X X
Hand Grips X X
Frame X X
Bushings X X
Bearings X X
Lubricate
Guide Rods X X
Bearings As Needed 1
Replace
Cables 1 3
Batca Fitness Systems strives to give you the very best in quality, performance and safety through carefully engineered
designs and excellent workmanship. In order to maintain this high level of quality the preventative maintenance schedule
below should be followed.
Clean upholstery, grips, and roller pads with mild soap and water generally after every use. The guide rods, chrome slides
and frame should be cleaned with a cotton cloth. Upon cleaning the guide rods, a thin layer of Silicone or Teon gel should
be applied to each rod to ensure a glass smooth performance.
An overall inspection should be done before each workout. If the warning and safety decals are worn or have been
removed they should be replaced immediately. The cables and cable systems should be inspected for signs of wear and
proper tension. In order to check cables properly you should carefully run the cable through your ngertips, checking for
signs of wear, cracks, burs and thinning spots. Replace any part at rst signs of wear. Cables should be adjusted for
proper tension. See assembly instructions for this detail. All hardware, stops, and adjustments should be checked and
tightened as required.
The guide rods on your machine should be cleaned and lubricated regularly. This will ensure a glass smooth performance
from your weight stack. A thin layer of either Silicone or Teon gel should applied to each rod.
Although cables should be inspected daily, it is important that ALL cables be replaced as directed in the schedule below.
Please note that at any rst sign of wear the cable should be replaced immediately.
If there are any questions concerning maintenance, please contact your local Batca dealer or contact Batca Fitness
Systems directly at:
Batca Fitness Systems
(919) 255-1233
www.batcatness.com
Preventive Maintenance

Related product manuals