When the Set Distance mode is chosen this will show as either mil
(miles) or km in the Driving Mode area of the screen.
The distance of the journey can be set using the up and down
arrows on the display to a maximum of 99km (61 miles).
If the Set Distance is the same as or less than the distance
remaining in the battery the rider will gain maximum assistance
from the motor.
If the Set Distance is greater than the remaining distance the
controller will reduce the amount of assistance so that the whole
journey can be assisted.
If there is a large difference between the Remaining distance and
the Set Distance the rider will get only minimal assistance.
The up and down buttons on the handlebar display can be used as
a temporary manual override to the assistance level set by the
bike. This will work for a short time before the app. and the
controller work together to maintain the assist level required to
complete the journey.
To Next Page
Loading...
