Need help?Do you have a question about the Batribike Diamond and is the answer not in the manual?
Warns about closing the socket cover before inserting/removing the battery to prevent damage.
Emphasizes plugging the charger into the battery before mains power and vice versa.
Explains the meaning of charger lights during the charging process.
Describes chargers with a single light indicator for charging status.
Advises on charging before storage and monthly charging to prevent deterioration.
Explains how to use the bike without switching on the battery or setting assist to level 0.
Introduces the display unit, its buttons, and information areas.
Details powering on the electric system using the battery and LCD display button.
Explains the function of the UP, POWER, and DOWN buttons on the display unit.
Describes how to turn off the LCD and power, including automatic shut-off.
Explains how the battery charge level is indicated on the LCD screen.
Details how to turn on and off the LCD backlight for night time use.
Explains how speed is displayed in MPH and can be changed to Km/H.
Details the 5 levels of pedal assistance and their performance/usage examples.
Discusses how weather, terrain, and load affect performance and range.
Explains how the display shows error codes and recommended actions.
Explains how setting assist to level 0 makes the bike function as a normal pedal bicycle.
Details how to activate and control the throttle for power delivery.
Notes that throttle control may be deactivated in some countries due to legal restrictions.
Explains how to use Launch Assist for smooth starts on inclines or junctions.
Mentions the bike is tested to BS EN15194 and the impact of throttle control on compliance.
Describes the default display showing Trip Time (TM) and Trip Distance (DST).
Explains how to toggle between Trip Time/Distance and Total Time/Odometer.
Clarifies that trip data resets when the power is turned off or automatically.
Shows how to set the display to show Average Speed using the UP/DOWN buttons.
Shows how to set the display to show Maximum Speed using the UP/DOWN buttons.
Explains how to return the display to showing Trip Time and Trip Distance.
Explains how to change gears using the right handlebar selector and the 7-speed Shimano system.
Describes the LED lights, their power source, and operation.
Details how to replace the AAA batteries in the front light unit.
Instructs to release throttle and pull brake levers to stop the bicycle.
Provides steps on how to place the bicycle on its centre stand.
Provides steps on how to place the bicycle on its side stand.
Warns not to sit on the bicycle while the stand is down.
Explains how to adjust seat height using quick-release fittings.
Details how to fold the pedals and release the centre frame lock.
Describes how to loosen the clamp and fold the handlebars.
Explains how to adjust handlebar height, rake angle, and bar rotation.
States the luggage rack's maximum load capacity of 25kg and secure strapping advice.
Mentions that other operations are like a normal pedal cycle.
Lists mechanical safety checks and visual inspection before each ride.
Covers cleaning the bike, chain, and gears after each ride or weekly.
Details checks for headset, brakes, spokes, cables, and bearings.
Recommends a yearly inspection of the hub motor and general bicycle by a dealer.
Emphasizes checking tyre pressures for optimal performance and range.
Explains how to unplug the motor and remove the rear wheel.
Guides on checking the 30A battery fuse if the battery fails to operate or charge.
Lists conditions for warranty, including proof of purchase and owner details.
Specifies warranty periods for frame, motor, electronics, and other parts.
Lists circumstances under which the warranty is voided, like misuse or accidents.
Outlines the process for making a warranty claim, including returning the bike to a dealer.
Advises on safe disposal of Lithium batteries and local authority facilities.
Provides contact details for Fallowgate Limited, the exclusive distributor.
To Next Page
General
