Quick Release fittings for Seat Height Adjustment
With the locking lever in the loose position, tighten the nut until finger tight. The
final tightening is done by moving the lever to the locked position. To undo move
the lever to the loose position to enable height adjustment.
Loose Locked
Folding the Bicycle (Quartz only)
Fold pedals by squeezing in as
per photo, and turning through
90 degrees.
Turn the pedals to a suitable position so they are not trapped when folding
the frame.
Release centre frame lock as follows:-
Flip catch Turn to side Lift up lever to
release pin from
frame
ā Fold frame front to back.
To Next Page
Loading...
