Key Charger Features
The MCU080 charger is a sophisticated 7 stage charger, utilizing switch mode and fully automatic
computerised control, designed to charge most 12 Volt SLA, Gel, Lead Acid and Calcium batteries.
• Ideal for automotive & marine batteries.
• Fully automatic 7 stage charging.
• Pulse mode technology that reduces oxidation,
evens electrolyte consistency and minimizes
temperature equating to longer battery life.
• Compatible with GEL, Calcium, Deep Cycle, SLA
and conventional ooded lead-acid batteries.
• Easy battery chemistry selection with push
button switch and LED indicators.
• LED display showing battery capacity status,
output voltage and warning indicators.
• Inbuilt battery testing with LED indicator and
ash selected battery LED.
• Internal charger temperature monitoring and
power output control.
• LED indicators show progress of charge.
• Zero volt minimum battery start up – can
charge a completely at battery.
• Over charging, short circuit and over
temperature protection.
• Reverse polarity protection.
• As a Gel, Lead Acid, SLA and Calcium battery
charger, the unit provides a safe method of
restoring discharged batteries, through a 7
stage charging process.
• Heavy duty design.
• Permanent connection lead supplied with
charger for vehicles that require frequent
charging such as classic cars, motorcycles or
marine craft.
Suitable for negatively (-) grounded vehicles where the negative lead from the battery is
connected to the vehicle chassis or engine block.
To Next Page
Loading...