Page 7For technical questions, please call 1-888-866-5797.Item 64942
SAFETYOPERATIONMAINTENANCE SETUP
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the appliance off and remove Battery Pack
before performing any procedure in this section.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Attaching Blower Tube
1. Slide Tube over the outlet, lining up the latch
with the indent on the Tube. Press the parts
together until the latch clicks into place.
CAUTION! TO PREVENT INJURY: Do not use
the Blower without the Tube attached. The Tube
helps prevent contact with internal moving parts.
2. Slide the Tube Extension over the end
of the Tube, aligning the tab on the Tube
with the hole on the Tube Extension.
Tube
Tube
Extension
Outlet
Latch
Tab
To Next Page
Loading...
