Page 11For technical questions, please call 1-888-866-5797.Item 56877
SAFETYOPERATIONMAINTENANCE SETUP
Tool Set Up
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch off, unplug it from its electrical outlet, and relieve all
pressure before making adjustments or installing accessories.
1. MAKE SURE THE WATER INLET
STRAINER AND WAND ARE FREE OF
MINERAL BUILDUP OR DEBRIS.
2. Insert Wand into end of Spray Gun, press in and
twist Wand clockwise until it locks into place.
3. Run water through water supply hose (not
included) to remove any debris. Turn off water.
4. Connect water supply
hose to Water Inlet on
front of Pressure Washer.
Tighten securely.
5. Nozzle Selection:
• This Pressure Washer includes several
Nozzles with different spray patterns. Select
the Nozzle that suits your requirements.
CAUTION! TO PREVENT INJURY AND
PROPERTY DAMAGE, USE HIGH-
IMPACT SPRAY WITH CAUTION.
• The Black Nozzle is used specifically for
dispensing detergent at lower pressure.
• Pull back on the collar at the end of the Wand,
insert the Nozzle, and release the collar so
that it holds the Nozzle securely in place.
To Next Page
Loading...