26
Operating manual for BAUER gear pump
10 CONFORMITY CERTIFICATE
EU Conformity Certificate
according to the EU Directive for Machines 89/392/EWG, Annex II A
We,
Röhren- und Pumpenwerk BAUER Gesellschaft m.b.H.
Kowaldstraße 2, A - 8570 Voitsberg - Austria
Tel. +43 / 3142 / 200 - 0, Telefax: +43 / 3142 / 23 0 95
herewith declare that in respect of its conception and construction and in the types and styles marketed by our
company, the machine mentioned below fully complies with the relevant fundamental provisions for safety and
health as stipulated in the EU directives.
Any modification of this machine without our prior express consent render this certificate invalid.
Designation of the machine: BAUER gear pump
Basic models: MAGNUM SM 540
SM 1000 / SM 2000
each without and with self primer
This range of machines has been designed and built in compliance with the standard:
EN 809
including also the normative references to
EN 292-1 - 1991, EN 292-2 – 1991, EN 294 - 1992 and EN 349.
Voitsberg, 01. 07. 2002
Röhren- und Pumpenwerk BAUER GmbH., A-8570 Voitsberg / Austria
Tel. +43 / 31 42 / 200-0, Fax: 23 095
Johann Langmann
Technical Director
To Previous Page
Loading...